Factory Reset; Software-Update; Backlight - LENCO Concerto DIR-2000 Benutzerhandbuch

5.2.5 Language
English is set as the default language. You may select your own
desired language.

5.2.6 Factory reset

A factory reset resets all user settings back to default settings. All the
presets, time, date and network configuration will be lost.
However, the current software version of the device can be stored as
it is registered with the internal radio portal. All favorites in the
Internet radio are also stored. Unless you re-register your device with
another account on the portal website.
5.2.7 Software update
Software upgrade to fix bugs and/ or additional features will be
available.
The device is set with the default to automatically check for updates'
availability periodically. You may also check the updates' availability
manually. If a newer software is available, you will be informed. Then
you may decide if you want to download and install the new software.
After a software upgrade, all user settings are maintained.
NOTE: Before starting the software upgrade, ensure that the device is
plugged into a stable main power connection. Disconnecting power
during the upgrade may permanently damage the device.
5.2.8 Info
View the firmware version and the radio ID.

5.2.9 Backlight

Allows you to change the backlight level to High, Medium or Low in
the power on mode. The timeout duration can be adjusted, which
allows the radio to turn to the standby backlight level when it has not
been used.
5.3 Internet Radio
The device can be channeled to radio stations and podcasts from
around the world through a broadband Internet connection.
17