About This Document; General Safety Instructions - Bosch Rexroth SB356 Bedienungsanleitung

24/124
1

About this document

These instructions contain important
information on the safe and appropriate
assembly, transportation, commissioning,
operation, maintenance, disassembly and
simple troubleshooting of the SB356 system
box.
Read these instructions completely,
especially chapter "2 General safety
instructions" on page 24, before working
with the SB356 system box.
Related documents
The SB356 system box is a system
component.
Also observe the instructions for the other
system components.
Also observe the generally applicable, legal
or otherwise binding regulations of European
or national legislation and the rules for the
prevention of accidents and for
environmental protection applicable in your
country.
2 General safety
instructions
The SB356 system box has been
manufactured according to the accepted
rules of current technology. There is,
however, still a danger of personal injury or
damage to equipment if the following general
safety instructions and the warnings before
the steps contained in these instructions are
not complied with.
• Read these instructions completely before
working with the SB356 system box.
• Keep these instructions in a location where
they are accessible to all users at all times.
• Always include the operating instructions
when you pass the SB356 system box on
to third parties.
Bosch Rexroth AGSB356 | 3 609 929 B67/2008-11
Intended use
The SB356 system box is a component in
terms of the machine directive 98/37/EC and
is not a ready-for-use machine. The product
is exclusively intended for being integrated in
a machine or system or for being assembled
with other components to form a machine or
system. The product may be commissioned
only if it is integrated in the machine/system
for which it is designed and the machine/
system fully complies with the EC machine
directive. Observe the operating conditions
and performance limits specified in the
technical data.
The SB356 system box is a work appliance
and not designed for private use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The system boxes are designed for use
without a control cabinet in industrial
environments and are in compliance with
protection type IP54 when the door is
closed.
Improper use
Any use of the SB356 system box other than
described in chapter "Intended use" is
considered as improper.
Personnel qualifications
Assembly, commissioning and operation,
disassembly, service (including maintenance
and repair) require basic electrical and
mechanical knowledge, as well as
knowledge of the appropriate technical
terms. In order to ensure operating safety,
these activities may therefore only be carried
out by qualified technical personnel or an
instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can
recognize possible hazards and institute the
appropriate safety measures due to their