Introduction; Presentation Of The Loop Driver; Description; The Range - AUDIOropa PRO LOOP Class-D Serie Bedienungsanleitung

1. Introduction

Thank you for having purchased the PRO LOOP D15 LOS class D loop driver!
Please take a few moments to read this manual. It will ensure you the best use of the pro-
duct and many years of service.

2. Presentation of the loop driver

2.1 Description

The PRO LOOP Class D series consists of loop drivers made to equip rooms with audio
support for people with hearing loss.
This series has been developed under strict and rigorous specifications. These devices
have been designed to facilitate their use and their installation.

2.2 The range

The PRO LOOP D15 LOS belongs to a new generation of induction loop drivers.
This driver is amongst the most compact on the market while offering the necessary fea-
tures (AGL, MLC, compressor, etc.) to ensure installation for rooms up to 3300 m² with a
single device.
This coverage makes it possible to comply with the international IEC-60118-4 standard.

2.3 Package contents

The following items are included:
- PRO LOOP D15 LOS induction loop driver
- Power cable 1.5 m, connectors CEE 7/7 - C13
- 2x 3-point connectors
- 1x 2-point connector, input
- 1x 2-point connector, loop output
- Rack mounting brackets and screws
- Adhesive loop-indication signs
- Warranty card
Should any of these items be missing, please contact your local retailer or the manufac-
turer.
English 21