Sony CDX-H910UI Serviceanleitung Seite 4

CDX-H910UI/HR910UI
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
• Connect the MAIN board (CN201) and the SERVO board
(CN401) with the extension cable (Part No. J-2502-076-1).
MAIN BOARD
CN201
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (Part No. A-1554-
409-A) should be replaced since any parts in the SERVO board
cannot be repaired.
NOTE FOR REPAIRING THE FRONT PANEL
The front panel should never be disassembled since it is water-
proof fi nished.
Replace the front panel overall assembly completely when replac-
ing the key board or other components of the front panel.
4
SECTION 1
SERVICING NOTES
J-2502-076-1
SERVO BOARD
CN401