Self-Cleaning Function - Silvercrest SHBR 560 A1 Bedienungsanleitung

Fig. 29

Self-cleaning function

The appliance has a self-cleaning function that allows you to automatically clean
the rotary brush
channel after use.
Place the switched-off appliance on the storage tray
cleaning station (see fig. 31).
Press the self-cleaning switch
Fig. 31
The following cleaning programme is started:
1. Cleaning solution is applied to the rotary brush
2. The rotary brush
is applied to the rotary brush
3. The rotary brush
30 seconds while cleaning solution is applied to the rotary brush
4. The appliance will switch off automatically when the cleaning programme
completes.
SHBR 560 A1
Fig. 30
6
, the brush chamber in the foot section
o
(see fig. 32).
Fig. 32
6
is started for approx. 10 seconds while cleaning solution
6
.
6
turns and the vacuum function remains active for approx.
3
and the suction
4
of the parking and
6
for approx. 20 seconds.
6
.
GB │ IE │ NI │
17 ■