Work Area; Personal Protective Equipment; Before Use - Hilti SF 2-A Bedienungsanleitung

5.3.5 Work area

a) Ensure that the workplace is well lit.
b) Ensure that the workplace is well ventilated. Exposure to dust at a
poorly ventilated workplace may result in damage to the health.

5.3.6 Personal protective equipment

The user and any other persons in the vicinity must wear suitable eye
protection, a hard hat, ear protection, protective gloves and breathing
protection while the tool is in use.

6 Before use

6.1 Battery use and care
NOTE
Battery performance drops at low temperatures. Use the tool only after
fully charging the battery. This ensures that maximum battery capacity is
available. Change to the second battery in good time. Recharge the battery
immediately so that it is ready for reuse.
Store the battery in a cool, dry place. Never store the battery where it is
exposed to the heat of the sun, on a radiator or behind glass, e.g. at a
window. Batteries that have reached the end of their life must be disposed
of safely and correctly to avoid environmental pollution.
Printed: 24.03.2014 | Doc-Nr: PUB / 5174884 / 000 / 00
Downloaded from www.Manualslib.com manuals search engine
en
37