Adjustments For Vertical Stroke - Bosch Rexroth HD 2 Montageanleitung

Required accessories
• Sensor
IEC/EN 60947-5-2-2004,
3 842 537 995 (F).
1. Mount two sensors (F)
with switch brackets (G)
on the switch carrier (H).
2. Mount the switch carrier
on the lift rotate unit.
3. Adjust the switching
distances: between
sensor (F) and
damping ring (J) on the
tow bar.
*) Switching distance
7.5.2

Adjustments for vertical stroke

2
1
3
0,5 ±1mm * )
Fig. 7: Adjusting the vertical stroke
3 842 358 735/2019-10, MIT: HD 2, Bosch Rexroth AG
Assembly 19/38
358 735-06