Operating Y Our New Appliance; Before First Use - Sage the Dose Control Pro Kurzanleitung

OPERATING Y OUR NEW APPLIANCE

B EFORE FIRST USE
Remove and safely discard all promotional labels
and packing materials attached to your Sage
appliance. Wash hopper, and cradles in warm
soapy water and dry thoroughly. Wipe exterior of
grinder with a soft damp cloth and dry thoroughly.
Place grinder on fl at level surface and plug power
cord into 220-240V outlet and switch Power 'ON'.
ASSEMB LING Y OUR SAG E
CONTROL DOSE
B e a n Ho p p e r
Align tabs on the base of the bean hopper and
insert hopper into position. Holding the hopper,
press down fi rmly and turn the bean hopper dial
45° to lock into position.
A "click" sound will be heard when the hopper is
properly locked in place.
Ensure the hopper and the Grind Size
Collar is aligned properly.
Fill with fresh coff ee beans and secure lid on top of
bean hopper.
NOTE
If the bean hopper has not been locked into
position, the GRIND TIME dial will not be
illuminated.
6
®
PRO
™
X
G RINDING FOR ESPRESSO
COFFEE
Use single wall fi lter baskets when grinding fresh
coff ee beans. Use the fi ner 1–25 settings in the
ESPRESSO range.
St e p 1 :
Insert the appropriate portafi lter cradle size. Insert
your portafi lter into the cradle.
CRADLES
50-54mm
58mm
St e p 2 :
Se l e c t i n g G r i n d Amo u n t
Select the desired amount of ground coff ee
required by turning the GRIND TIME dial.
St e p 3 :
Tamping the Ground Coff ee
After dosing the portafi lter with freshly ground
coff ee, tamp down with between 15-20kg
of pressure.
PUSH
Sec