Problem
The mixer does not
turn
The ice cream mix-
ture does not reach
the desired consis-
tency
Solution
Check whether the appliance is connected to a func-
tioning electrical outlet as specified on the rating pla-
te, and is switched on.
If the ice cream mixture has become too solid, the mi-
xer stops turning. Switch off the appliance. Remove
the motor, lid and mixer and let the ice cream thaw
slightly. Remove it, e.g. with a plastic spatula.
The motor is overheated and has been switched off au-
tomatically by the overheating protection circuit. Un-
plug the power plug and allow the appliance to cool.
Remove the motor, lid and mixer and let the ice cream
thaw slightly. Remove it, e.g. with a plastic spatula.
If none of the causes cited apply, contact our custo-
mer service department.
Check all recipe ingredients, mix them thoroughly and
ensure that they are adequately pre-cooled.
If you are using alcohol, only add it to the ice cream
mixture when it has already reached the desired con-
sistency. If you add the alcohol too soon, it prevents
the ice cream mixture from solidifying.
Copyright UNOLD AG | www.unold.de
31