Philips 5000 Serie Bedienungsanleitung Seite 27

Problem
I replaced the
shaving heads,
but the
replacement
reminder is still
showing.
Water is leaking
from the bottom
of the appliance.
Possible cause
You have not reset
the replacement
reminder.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
English
Solution
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see 'Replacement').
Then separate the cutter
from its guard and rinse
each matching set under
the tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
To reset the replacement
reminder, press and hold
the on/off button for
approx. 7 seconds.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
27