How To Use The Accessories - Kärcher SV 7 Originalbetriebsanleitung

Illustration
 Move the handle to its original position until it locks
in place.
Illustration
 Evenly roll up the power cable and place it in the
power cable compartment.
Illustration
 Put the water filter container back in its position and
ensure that it is properly placed.

How to Use the Accessories

 Please read the cleaning instructions of the manu-
facturer before treating leather, special fabrics and
wooden surfaces and always do a trial on a sample
or some hidden part. Let the steam-treated surface
dry and then check whether there are any changes
to the colour or form on account as reaction to the
steam.
 We recommend that you be very careful while
cleaning wooden surfaces (furniture, doors, etc.)
because long exposure to steam can damage the
wax coating, the finish or the surface colours.
Hence we recommend that you use steam only for
short intervals or first clean the surface with a cloth
that has been steam-moistened.
 For highly sensitive surfaces (for e.g. synthetic ma-
terials, painted surfaces, etc.) we recommend that
you use the steam function at the minimum perfor-
mance level.
 Cleaning of stainless steel: Avoid the use of abra-
sive brushes. Use hand nozzle with rubber lip or
detail nozzle without a round brush.
Refreshing textiles
 Always test the compatibility of the fabrics on a hid-
den spot prior to treating them with the appliance:
Steam first, then allow to dry before checking for
colour changes or deformation.
Floor nozzle
ATTENTION
Material damage if the setting of the steam level is too high.
 Sensitive floors, such as parquet floors may only be
cleaned with the highest suction performance and
minimum steam level.
Application examples
 Cleaning of large surfaces, floors made of ceram-
ics, marble, parquet, carpets, etc.
 Floor nozzle with brush strip insert: For etching and
scrubbing down stubborn soiling.
 Floor nozzle with rubber lip insert: For vacuuming
up liquids from smooth surfaces.
 Floor nozzle with hard rubber insert: Cleaning and
refreshing of carpeting.
Mounting the attachments
Illustration
 Slide the locking mechanism of the floor nozzle out-
wards.
 Put the insert into the bottom side of the brush.
 To secure the insert, slide the locking mechanism
inwards.
 Removing the insert: Slide the locking mechanism
outwards again.
 Remove the insert.
The closer you hold the nozzle to the dirty spot, the
higher the cleaning effect as temperature and pressure
of the steam reach their maximum values immediately
when they are emitted from the nozzle.
Application examples
 The use of the detail nozzle is recommended for
hard to reach areas.
Cleaning of stainless steel, window panes, mirrors

and enamel surfaces.
 Cleaning of corners on stairs, window frames, door
posts, aluminium profiles.
 Cleaning of fittings.
 Cleaning of window shutters, radiators.
Detail nozzle and accessories
ATTENTION
Material damage (e.g. scratches on painted surfaces)
due to the use of the round brush on sensitive surfaces.
 Do not use the round brush on sensitive surfaces.
 The round brush is suitable for stubborn soiling on
especially small surfaces such as stove tops, roller
shutters, tile joints, sanitary facilities, etc.
 Extension: With this accessory an optimum clean-
ing of places that are particularly hard to reach is
possible. Ideal for cleaning heaters, door posts,
windows, roller shutters, sanitary facilities.
Application examples
 The use of the hand suction nozzle is recommend-
ed for large glass and mirror surfaces, smooth sur-
faces in general or for the cleaning of textile surfac-
es, such as sofas, mattresses, etc.
Hand nozzle and accessories
 Window cleaning insert wide: Window panes and
surfaces of larger dimensions.
 Window cleaning insert narrow: Window panes and
surfaces of smaller dimensions.
 Brush collar: For carpets, staircases, car interiors,
textile surfaces in general (after carrying out a test
on a hidden area). For abrasive cleaning and
scrubbing.
Pull the terry cloth cover over the manual nozzle.

Especially well-suited for small washable areas,
shower stalls and mirrors.
Cleaning of Glass
ATTENTION
Material damage due to steam release onto cold win-
dow panes.
 In seasons with particularly low temperatures, pre-
warm the window panes by releasing steam with a
distance of approx. 50 cm to the surface to be treated.
ATTENTION
Material damage due to steam release onto sealed
spots of the window frame.
 Do not level the steam at these spots.
 Apply steam to the glass surface from a distance of
approximately 20 cm until the surface is moistened
evenly.
 Switch off the steam supply.
 Strip the glass surface web by web from top to bot-
tom by means of the rubber lip and vacuum off.
 Wipe the rubber lip and the lower window frame dry
as necessary.
– 12
EN
Detail nozzle
Hand nozzle
23