Dell POWERVAULT MD1120 Rack-Installationsanleitung Seite 17

Installing the VersaRails Mounting Rails
1 At the front of the rack cabinet, position one of the VersaRails mounting
2 Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting-
3 At the back of the cabinet, pull back on the mounting-bracket flange
4 Install two 10-32 x 0.5-inch flange-head Phillips screws in the back
5 Repeat step 1 through step 4 for the mounting rail on the other side
6 Ensure that the mounting rails are mounted at the same position
Downloaded from www.Manualslib.com
rails so that its mounting-bracket flange fits between the marks
(or numbered location) on the vertical rails (see Figure 1-6).
The holes on the front of the mounting-bracket flange should align
with the holes between the marks you made on the front vertical rail.
bracket flange's top- and bottom-holes to secure the mounting rail
to the front vertical rail.
until the mounting holes align with their respective holes on the back
vertical rail.
mounting-bracket flange's top- and bottom-holes to secure the mounting
rail to the back vertical rail.
of the rack.
on the vertical rails on each side of the rack.
manuals search engine
Rack Installation Guide
15