Intended Use; Technical Description - Dometic PERFECTVIEW CAM35 Montage- Und Bedienungsanleitung

CAM35
4

Intended use

The double camera CAM35 is primarily intended for use in the vehicles Fiat Ducato,
Citroën Jumper, Peugeot Boxer starting from model year 2006 with single roof. The
camera console is mounted between the bodywork and the brake light. It can be
used in video systems to observe the space around the vehicle from the driver's seat
when manoeuvring or parking, for example.
!
WARNING!
Danger of personal injury by vehicle.
Reversing video systems are designed merely as an additional aid for
reversing, however this does not relieve you of the duty to take
proper care when reversing.
5

Technical description

The reversing camera and the long-distance camera (only CAM35 TWIN) are
housed in one console for the original brake light. The camera image is transferred
to a monitor via a system cable. The CAM35 is also suitable for connection to the
original Fiat navigation system Uconect, as the cameras provide an NTSC video
signal.
The camera consists of the following elements:
No. in
Description
fig. 8, page 5
1 Reversing camera
2 Long-distance camera (only CAM35 TWIN)
3 6-pin connection cable for long-distance camera (only CAM35 TWIN)
4 6-pin connection cable for reversing camera
Only for CAM35 TWIN
In the CAM35 TWIN, a monitor with two video inputs must be connected that can
be switched between the image of the reversing and the long-distance cameras.
The long-distance camera transmits the image as if you were looking in the rear view
mirror.
EN
Intended use
13