Inhaltsverzeichnis
Werbung
Changing the signal duration
Care and cleaning
Cleaning agents
Appliance exterior
with stainless steel fronts
You will hear a signal when the appliance is switched
off. You can change the duration of the acoustic
signal.
Press start for approximately 6 seconds.
The new signal duration is adopted. The clock
reappears in the display.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
d
Do not use high pressure cleaners or steam jets.
There is a danger of short circuiting.
Do not use caustic or abrasive cleaning agents. The
surface could be damaged. If an abrasive substance
comes into contact with the frontage, wash it off
immediately with water.
Use soapy water and dry with a soft cloth.
Use a soft cloth to subsequently dry off any soapy water.
Always remove limescale, fat, eggwhite marks and starchy
residue immediately.
Special stainless steel cleaning agents can be obtained from the
after sales service or from specialist shops.
59
Werbung
Kapitel
Inhaltsverzeichnis
