Electrical Connection - Silvercrest SKES 2 A1 Bedienungsanleitung

Electrical connection

SKES 2 A1
Downloaded from www.Manualslib.com
♦ Connect the VIDEO OUTPUT socket
allow the singer(s) to read the song lyrics.
♦ Connect the AUDIO OUTPUT sockets of the device (L = left channel
right channel ) either to the audio input of the television or a special ampli-
fi er system (Hi-Fi system, PA, or similar). Using an amplifi er system is sure
to produce a better sound quality. If the television only has a SCART input,
you can use the supplied SCART/cinch adapter "IN"
markings on the adapter and cable connections as an orientation aid.
♦ Connect the supplied microphones
Their signals correspond to the left
■ Before you connect the device, compare the connection data (voltage and
frequency) on the mains adapter
power source. This data must agree in order to avoid damaging the product.
■ Make sure that the mains adapter
is not routed over hot surfaces and/or sharp edges.
■ Insert the connection cable plug into the power supply
device. Ensure that the power cable is not stretched tightly or kinked.
■ Do not allow the cable to dangle over edges (trip wire eff ect).
■ Do not place the device, furniture or any other objects on the cable. Do not
kink the cable or knot it and do not connect it to other cables. Never wrap
the cable tightly around other objects otherwise the conductors inside the
cable could break and cause a malfunction.
manuals search engine
to the video input of a television to
. Use the coloured
to the inputs MIC1 and MIC2
and right audio outputs.
nameplate with that of the intended
connection cable is not damaged and
at the rear of the
GB
, R =
.
9