Working Procedures; Cleaning - Parkside PGG 15 E4 Originalbetriebsanleitung

Working procedures

You can use the mini engraver to create imaginative and unique engrav-
ings . For example, you can permanently mark valuable items . You can
engrave numbers and letters onto metal, glass, wood, plastic, ceramics,
stone and leather . To do this, use the supplied engraving templates
♦ Hold the appliance at an angle, in the same way you would hold a
pen .
♦ Your arm should be resting on the table .
♦ Move the engraving tip
pressure . To find out the ideal engraving speed, practice on a spare
piece of material .
NOTE
► The supplied engraving tip
fore not suitable for engraving electronic media such as CDs, DVDs,
etc . These materials and their readability could be damaged .

Cleaning

WARNING! RISK OF INJURY! Always remove
the plug from the power socket before all maintenance
and cleaning work on the appliance.
■ Remove all dirt from the appliance . Use a dry cloth to do this .
PGG 15 E4
over the workpiece while applying gentle
is made of tungsten steel . It is there-
.
GB │ IE │ 29 ■