Turning On And Off - Philips 3000i Serie Benutzerhandbuch

PM2�5
AeraSense sensing technology
accurately detects and quickly
responds to even the slightest particle
change in the air� It provides you with
reassurance with real-time PM2�5
feedback�
Most of the indoor air pollutants
fall under PM2�5 – which refers to airborne particle pollutants smaller than
2�5 micrometers� Common indoor sources of fine particles are tobacco smoke,
cooking, burning candles� Some airborne bacteria and the smallest mold
spores, pet allergen and dust mite allergen particles also fall under PM2�5�
GAS
With an advanced gas sensor, a display
ranging from L1 to L4 shows the level change
of potential harmful gases (incl� VOC, odor,
etc�) detected� L1 indicates best air quality�

Turning on and off

Note:
• For optimum purification performance, close doors and windows�
• Keep curtains away from the air inlet or air outlet�
1
Put the plug of the air purifier in the power socket�
2
Touch to switch on the air purifier�
» The air purifier beeps�
» The " " displays on the screen during warming up� Then the air
purifier shows the IAI/PM2�5/Gas level after measuring the air quality�
» The air purifier operates in the auto mode with IAI displayed on the
screen (fig h)�
3
Touch and hold the
Note: If the air purifier stays connected to the electrical outlet after turning
OFF, the air purifier will operate under the previous settings when turned ON
again�
EN
8
PM2�5 level
≤12
13-35
36-55
>55
button for 3 seconds to switch off the air purifier�
Air quality light color
Blue
Blue-purple
Purple-red
Red
Gas level Air quality light color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red