Installing Your Television Set; Quick Installation - Philips 32PF732010 Bedienungsanleitung

Installing your television set

Quick installation

When you turn on the TV set for the first time,
a menu is displayed on screen.This menu
prompts you to select the country and language
for the menus:
If the menu is not displayed, press the
to display the menu.
& Use the
select your country and validate with
If your country does not appear in the list, select
choice ". . . "
é Next select your language using the
and validate with
Downloaded from www.Manualslib.com
Plug'n'Play
Country Language
GB English
<>
keys on the remote control to
≥
.
manuals search engine
& Positioning the television set
Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g. lamp, candle, radiator). Do not
obstruct the ventilation grid at the rear.
Connecting the aerials
é
• Use the aerial connection lead supplied and
connect the
of the TV to your aerial socket.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240 V/50 Hz).
For connecting other appliances see page p.12.
Switching on
"
To switch on the set, press the
green indicator comes on and the screen lights
up. Go straight to the Quick Installation chapter.
If the TV remains in standby mode(red indicator),
press the
P -/+
The indicator will flash when you use the remote control.
" The search starts automatically.All the available
TV programmes and radio stations will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press
programme is found, consult the possible solutions p. 14.
' If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.
key
MENU
( If this is not the case, you need to use the Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast their
≥
.
own sort parameters (region, language, etc.). In this
case, indicate your choice using the
validate with
<>
keys
:
socket situated at the bottom
key. A
POWER
key on the remote control.
. If no
MENU
<>
keys and
≥
.
5