Kenwood BL700 Serie Bedienungsanleitungen Seite 6

Only use the goblet with the
●
blade assembly supplied.
Never let the power unit, cord or
●
plug get wet.
Never use a damaged
●
appliance. Get it checked or
repaired: see 'service and
customer care'.
Never use an unauthorised
●
attachment.
Never leave the appliance
●
unattended when it is operating.
When removing the blender or
●
mill from the power unit:
wait until the blades have
● ●
completely stopped;
don't accidentally unscrew
● ●
the goblet or mill jar from the
blade assembly.
Never run the blender empty.
●
Never blend more than the
●
maximum capacity stated in the
recommended speed chart.
To ensure long life of your
●
blender, do not run it for longer
than 60 seconds or the mill for
longer than 30 seconds.
Smoothie recipes - never blend
●
frozen ingredients that have
formed a solid mass during
freezing, break it up before
adding to the goblet.
Don't use the blender as a
●
storage container. Keep it empty
before and after use.
Always use the blender on a
●
secure, dry level surface.
Never place this appliance on or
●
near a hot gas or electric burner
or where it could touch a heated
appliance.
Misuse of your blender can
●
result in injury.
This appliance is not intended
●
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
appliance by a person
responsible for their safety.
Children should be supervised
●
to ensure that they do not play
with the appliance.
Only use the appliance for its
●
intended domestic use.
Kenwood will not accept any
liability if the appliance is subject
to improper use, or failure to
comply with these instructions.
The maximum rating is based
●
on the attachment that draws
the greatest load. Other
attachments may draw less
power.
before plugging in
Make sure your electricity supply
●
is the same as the one shown
on the underside of the
appliance.
This appliance conforms to EC
●
directive 2004/108/EC on
Electromagnetic Compatibility
and EC regulation no.
1935/2004 of 27/10/2004 on
materials intended for contact
with food.
key
blender
filler cap
lid
goblet
sealing ring
blade unit
base
cord storage
speed + pulse control
soup button
ice button
power unit
vents
mill (if supplied)
mill jar
mill lid
to use your blender
1 Fit the sealing ring
blade unit
is located correctly in the
grooved area.
Leaking will occur if the
●
seal is damaged or
incorrectly fitted.
3
into the
- ensuring the seal