Safety Information; Items Supplied; Proper Use; Technical Data - EINHELL T-MS 3,6 Originalbetriebsanleitung

Anleitung_T_MS_3_6_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual including
the safety instructions with due care. Keep this
manual in a safe place, so that the information is
available at all times. If you give the equipment to
any other person, give them these operating and
safety instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout and items supplied
(Fig. 1)
2.1 Layout
1. ON/OFF switch
2. Locking button for ON/OFF switch
3. Cutting attachment
4. Locking knob for changing the cutting attachment
5. Charging connection
6. Charging control lamp
7. Battery charger
8. Charging cable

2.2 Items supplied

Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until the
end of the guarantee period.
24.08.2011 8:48 Uhr Seite 41
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Cordless universal cutter
Additional cutting attachment (1x)
Protective sleeve for cutting attachment (2x)
Battery charger
Original operating instructions
Safety information

3. Proper use

The equipment is designed for cutting cardboard,
paper, wall-paper and similar materials.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply:
Idling speed:
Battery charger output voltage:
Battery charger output current:
Battery charger supply voltage: 220-240V~50/60 Hz
Battery charger power rating:
Charging time:
Battery type:
Number of cells:
Rated capacity:
Weight:
GB
3.6 V DC
10 000 rpm
6 V
300 mA
7 W
3 - 5 hours
Li-Ion
1
1.3 Ah
0.3 kg
41