Assembly; Assemble/Set Workpiece Supports; Assemble/Adjust Spark Protection; Screw Device On To Workbench - Parkside PNTS 250 B1 Originalbetriebsanleitung

facturer of their medical implant
before operating the machine.

Assembly

Caution! Risk of injury!
- Ensure that you have sufficient
space in which to work, and that
you do not endanger other peo-
ple.
- Always fasten the device on to
the work surface with screws
featuring the sufficient length and
thickness in order to maintain
control of the device.
- All covers and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug before
changing the setting on the de-
vice.
Assemble/set workpiece
supports
1. Screw the workpiece supports
(6) on to the device.
To do this, use the screw (16),
washer (15), toothed washer (14)
and star nut (7) supplied.
2. Set the workpiece support (6) of
the dry grinding disc with the star
grip nut (7) so that the distance
between the dry grinding wheel
(5) and the workpiece support (6)
must not exceed 2 mm.
Periodically readjust the workpiece
support in order to offset the wear
and tear of the grinding disc (dis-
tance max. 2 mm).
Assemble/adjust spark
protection
1. Screw the spark protection holder
(18) onto the protective hood
( 25). For this, use the adjus-
ting screw (21) including the snap
ring and washer (20/19) and the
nut (17).
2. Adjust the spark protection holder
(18) with the aid of the adjusting
screw (21) - The distance between
the dry grinding wheel (
and the spark arrester holder (18)
must not exceed 2 mm. (see small
image).
Periodically readjust the spark pro-
tection in order to offset the wear
and tear of the grinding disc (dis-
tance max. 2 mm).
Despite the spark protection, you
should always wear protective glass-
es when working in order to avoid
eye injuries.

Screw device on to workbench

1. Remove the rubber foot (10) of the
water container.
2. Screw the device onto the flat
workbench with 4 screws and
nuts. Insert the screws through the
4 bore holes (9) on the base of
the device.
The screws and nuts required for as-
sembly are not part of the scope of
delivery.
G B M T
5)
4 5