Working Procedures - Parkside PGG 15 C2 Originalbetriebsanleitung

Working procedures

You can use the mini engraver to create imaginative and unique
engravings. For example, you can permanently mark valuable items.
You can engrave numbers and letters onto metal, glass, wood,
plastic, ceramics, stone and leather. To do this, use the supplied
engraving templates
♦ Hold the appliance at an angle, in the same way you would
hold a pen.
♦ Your arm should be resting on the table.
♦ Move the engraving tip
gentle pressure. To find out the ideal engraving speed, practice
on a spare piece of material.
NOTE
► The supplied engraving tip
therefore not suitable for engraving electronic media such as
CDs, DVDs, etc. These materials and their readability could be
damaged.
PGG 15 C2
.
over the workpiece while applying
is made of tungsten steel. It is
GB │ CY │
11 ■