Kd-49Xh95Xx, Ke-49Xh95Xx - Sony SU-WL450 Installationsinformationen

3
Preventing the bottom of the TV
from shifting.
 Take up the slack of Belt  and attach it
to the wall tightly.
2-a

 Use a 5 mm diameter screw or
equivalent (not supplied).
Note
 Try to pull the bottom of the TV towards yourself
slightly, to make sure that it does not move forward.
If there is any movement, it is not fixed correctly, and
the Belt  should be secured firmly again.
KD-49XH95xx,
KE-49XH95xx
WARNING
 Be sure that two or more persons (three or more
persons for 75 inches and above TV set) hold the TV
when carrying it.
2-b

− 16 (GB) −
1
Lift the TV.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Installing the
Wall-Mount Bracket to the wall" on page
9.
 Make sure that the rear of the TV
touches the Base or Base Adaptor when
holding the TV.
Note
 Hold the TV securely with both hands.
2
Install the TV onto the Base or
Base Adaptor.
 Gently slide down the TV and hang the
Pulleys  attached to the rear of the TV
to the Base or Base Adaptor, making
sure to confirm the shape of the holes.
 After installing the TV on the wall,
confirm the Pulleys  are firmly latched
into the Base or Base Adaptor.
 Release both hands slowly to ensure
that the TV does not fall.
