Broadcast Calls; Making Broadcast Calls - Motorola WAVE TLK 100i Handbuch

English
• You hear a short alert tone the moment the transmitting
radio releases the PTT button, indicating the channel is
free for you to respond.
1 To respond to the call, press PTT button.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone.
3 Release the PTT button to listen.
NOTICE:
The call ends when there is no voice activity
for a predetermined period.

Broadcast Calls

A Broadcast Call is a call from an individual radio to every
radio on the channel.
Broadcast Calls are used to make important
announcements, that require your full attention. You cannot
respond to Broadcast Calls.
26
If you switch to a different channel while receiving the call,
your radio stops receiving the Broadcast Call. You cannot
use any side button functions until the call ends.
To receive calls from or make calls to the group of users
using broadcast call, your radio must be configured to the
broadcast call talkgroup by your dealer.

Making Broadcast Calls

1 Press the programmed Talkgroup/Contact List
Scroll Rocker.
2 Press and hold the PTT button to make the call.
The display shows a countdown from 3, 2, and 1.
3 Wait for the Talk Permit Tone or PTT Side Tone to
end and speak clearly into the microphone if
enabled.
The green LED lights up. The display shows the call
alias.