ENGLISH
8
9
Remove the sandwiches (fig. 7).
Use a wooden or plastic utensil (e.g. a spatula) to remove the toasted sandwiches from the
sandwich maker. Do not use metal, sharp or abrasive kitchen utensils.
To continue making sandwiches, place two new slices of bread on the lower plate when the green
heating-up light goes out.
10
Unplug the appliance after use.
Recipes for toasted sandwiches
Ham, cheese and pineapple sandwiches
4 slices of white bread
2 slices of cheese
2 slices of pineapple
2 thin slices of ham
curry powder
Let the sandwich maker heat up.
B
Put the cheese, the pineapple and then the ham on two slices of bread. Sprinkle the ham with some
B
curry powder and put the other two slices of bread on top.
Follow the instructions in the chapter 'Making toasted sandwiches'.
B
Tomato, cheese and anchovy sandwiches
4 slices of white bread
1 or 2 tomatoes (cut into slices)
2 tablespoons of grated Parmesan cheese
6 anchovies
paprika, marjoram
Let the sandwich maker heat up.
B
Put the slices of tomato, the anchovies and the grated cheese on two slices of bread. Sprinkle with
B
some paprika and marjoram and put the other two slices of bread on top.
Follow the instructions in the chapter 'Making toasted sandwiches'.
B
Grilling (contact grill)
Never let the contact grill operate unattended.
1
Place the grilling plates in the appliance (fig. 8).
When you insert the plates properly, you will hear a click.
2
Lightly grease the plates with a little butter or oil.
3
Turn the thermostat knob to the temperature setting that is appropriate for the ingredients
to be grilled (1=low temperature, 5=high temperature) (fig. 9).
4
Insert the plug into the wall socket.
The red power-on light and the green heating-up light go on.
5
You can place the ingredients on the lower grilling plate when the green heating-up light has
gone out (fig. 10).
For an optimal result, the ingredients should be placed in the centre of the lower grilling plate.
During the cooking process, the green heating-up light goes on and goes out from time to time as
an indication that the heating elements are switched on and off to maintain the correct temperature.
6
Close the appliance (fig. 11).
Lower the upper grilling plate carefully onto the ingredients until the auto-lock mechanism clamps
the upper plate onto the lower plate. The upper grilling plate now rests on the food, causing it to
be grilled evenly on both sides.