ENGLISH
6
General description
A
Vario Lock`
B
Removable plates (dishwasher-proof): sandwich plates (B1: cut & seal or rectangular-shaped),
waffle plates (B2: Belgian or Nordic), grilling plates (B3).
C
Auto Lock
D
Cool-touch handgrips
E
Power-on light
F
Heating-up light
G
Cord storage
H
Plate release buttons
I
Thermostat knob
J
Handles of plate
Features
Vario Lock`
The hinge system automatically adapts to the removable plates that are put in the appliance.
Plates
-
HD2430: Belgian waffle maker, cut & seal sandwich maker, contact grill.
-
HD2431: Belgian waffle maker, rectangular-shape sandwich maker, contact grill.
-
HD 2422: Nordic waffle maker (heart shape), cut & seal sandwich maker, contact grill.
-
HD2433: Nordic waffle maker (heart shape), rectangular-shape sandwich maker, contact grill.
Auto Lock
An automatic clamping mechanism that closes the 3-in-1 appliance. The auto-lock mechanism
should not be activated when the Belgian waffle plates are inserted to allow optimal performance as
a waffle maker.
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
Check if the voltage indicated on the bottom of the appliance corresponds to the local mains
voltage before you connect the appliance.
Plug the appliance into an earthed wall socket.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
Do not immerse the appliance or the mains cord in water or other liquids.
Position the appliance so that:
- the mains cord does not hang over the edge of a table or worktop;
- children cannot touch the appliance when it is in use;
- it stands on a flat, stable surface and is surrounded by sufficient free space.
Always unplug the appliance after use.
Keep the appliance out of the reach of children.
Do not let the appliance operate unattended. Do not operate it under or near curtains or
other flammable materials or under wall cabinets, as bread may burn.
Avoid touching the metal parts of the toaster as they become very hot during toasting.
Let the appliance cool down completely before changing the plates, cleaning the appliance or
putting it away.
Make sure you mount the plates securely when you change them.
Never touch the plates with sharp or abrasive items, as this will damage the non-stick surface.
Always clean the appliance after use.
Make sure the mains cord does not come into contact with or too close to the hot surfaces
of the appliance.