Etel AUDIOGLASS 651 Installations- Und Bedienungsanleitungen Seite 52

Programming:
1. Select an identification code
2. Remove a battery from the AccessGlass unit or roadside panel.
Disconnect the handset battery.
Wait for about 10 seconds then replace the batteries.
3. Set microswitch 4 on the roadside panel to "On"
and microswitch 1 on the handset to "On"
4. Press the ring button.
5. A sound can be heard corresponding to the radio transmission and the indicator on the roadside
panel flashes red and green.
6. Set microswitch 4 on the roadside panel to "Off" and microswitch 1 on the handset to "Off".
Programming is complete
For information
The 2.4 GHz band (used by our products and others listed below) may be used freely with no fees or
licence costs for users.
However we wish to draw your attention to the fact that there is no guarantee that a free band will
not suffer interference from a licensed band (e.g. television (with licence fee) , GSM (licence included in
subscription), etc.).
There is thus a risk of interference independent of the design of the unit.
List of devices which may operate in the 2.4 GHz band and thus interfere with transmissions from AG
651 and AG 652 units :
Cordless telephones.
Microwave ovens.
TV transmitters.
Wireless video surveillance and baby monitors.
Cordless headphones.
Computers.
WiFi networks.
Certain toys (joysticks, etc.).
52GB
1 2 3 4 5 1 2 3
roadside panel handset
ON
OFF
ON
OFF
ON
OFF