Operation; Switching On And Off; Selecting Speed And Abrasive Belt (Continuous Operation) - Parkside PBS 900 C3 Originalbetriebsanleitung

Removal:
♦ Pull off the dust extraction device hose .
♦ Pull the dust extraction adapter
the reducer , if attached) .

Operation

Switching on and off

While operating the belt sander, you can choose
between instantaneous and continuous operation .
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Adjusting the rotational speed (instantaneous
operation)
Press the ON/OFF switch
speed . Increasing the pressure increases the speed .
Switching to continuous operation:
♦ Press the ON/OFF switch
in and then press the lock button
Switching off continuous operation:
♦ Press the ON/OFF switch
it .
Selecting speed and abrasive belt
(continuous operation)
You can use the speed preselector wheel
adjust the speed, while the appliance is running
( – = lower speed, + = higher speed) . The optimum
belt speed is dependent on the workpiece or ma-
terial being processed . We recommend carrying out
a practice run to determine the correct speed . In
the table below, you will find some recommended
values which will help you determine which belt
and speed to use for which job .
PBS 900 C3
off (and also
.
.
lightly for a low
, keep it pressed
.
and then release
to
Material/
working area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Material/
working area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Material/
working area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Material/
working area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Material/
working area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Material/working
area
Rough sanding
(grain size)
Finishing (grain size)
Speed preselection
Softwood
60
240
high
Hardwood
60
180
high
Chipboard
60
150
high
Removing paint/
varnish
60
––
high
Rubbing down
paintwork/varnish
150
320
low
Removing rust from
steel
40
120
medium/high
GB │ IE │ 17 ■