LG CRN-8240E Bedienungshandbuch Seite 8

I Connecting the notebook PC with PCMCIA card/cable
Interface connector
✻
Power for all devices should be turned off before attaching cables.
1. Connect the PCMCIA interface card to the interface connector at the rear of
the CD-ROM drive.
Make sure that the cable of the PCMCIA interface card is firmly connected to
the interface connector at the rear of the CD-ROM drive.
2. Insert the interface cable/card into your notebook PC's card slot firmly.
3. Turn the system on to install the PCMCIA CD-ROM device driver. Please
follow the software installation procedures.
Note :
• Do not force the interface cable/card since this could damage the interface
cable/card.
I For desktop PC's with a PC card reader (or PC card adaptor)
• A commercial PC card reader (or PC card adaptor) is required in order to connect
the CD-ROM drive to a desktop PC.
For the installation method and further information, refer to your PC card reader
(or PC card adaptor) manual.
Interface cable/card
E-8
Card slot