Sony FW-85BZ35F Installationsanleitung Seite 18

3
Firmly secure the monitor and
the Base Bracket using the
screws supplied with SU-WL500
(+BVST4 × 12).
C: Portrait, no leaning
18
(GB)
Screw
(+BVST4 × 12)
D: Portrait, +20° leaning
Note
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
WARNING
Be sure to tighten the securing screw firmly.
If you fail to do so, the monitor may fall
when it is pushed upward and cause injury.
Confirming the
completion of the
installation
Follow the instructions in the SU-WL500 instruction
manual to confirm.
When removing the
monitor
Follow the instructions in the SU-WL500 instruction
manual to remove.
Screw
(+BVST4 × 12)