Troubleshooting - Silvercrest SDI 3500 B2 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SDI 3500 B2

Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface. This can
cause damage to the heating zones (1 and 3).
Clean the side surfaces and the power cable (2) with a slightly damp cloth.
Dirt and burnt-on food residues on the surface of the heating zones (1, 3) can be cleaned off using a
scraper for glass hotplates and an appropriate detergent.

9. Troubleshooting

If your induction hotplate does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Warranty information" on page 56).
Risk of electric shock!
Never try to repair the appliance yourself.
Problem
Induction hotplate not
working
Heating zone (1 or 3)
not getting hot
54 - English
Possible cause
Power cable (2) not
connected.
Child lock activated.
No pan on the heating
zone (1 or 3)
Cookware not suitable for
induction
Incorrect heating zone (1,
3) switched on
Remedy
Connect the power cable (2) to a live mains
socket.
Press and hold the button (14) for 3 seconds to
deactivate the child lock.
Place a pan on the heating zone (1 or 3).
Only use cookware which is suitable for
induction hotplates.
Operate the left heating zone (1) using the
on/off switch (11) on the left control panel
(B). Operate the right heating zone (3) using
the on/off switch
panel (C).
(11) on the right control