Before First Use - AEG S56090XNS1 Benutzerinformation

50 www.aeg.com

BEFORE FIRST USE

INSTALLING WATER LINE
1. For models with Automatic Ice
Maker
– The water pressure should be
2.0~12.5 kgf/cm2 or more to run
the Automatic Ice Maker.
– Check your tap water pressure. If a
cup of 180 cc is full within 10 sec-
onds, the pressure is appropriate.
– If the water pressure is not high
enough to run the Automatic Ice
Maker, call the local plumber to get
an additional water pressure pump.
When installing the water tubes, en-
2.
sure they are not close to any hot sur-
faces.
3. The water filter only "filters" water. It
does not eliminate any bacteria or mi-
crobes.
4. The filter life depends on the amount
of use. We recommend you replace
the filter at least once every 6 months.
When attaching the filter, place it for
an easy access (to remove and re-
place) .
5. After installing refrigerator and water
line system, select WATER on your
control panel and press it for 2–3 mi-
nutes to supply water into the water
tank and dispense water.
www.preciz.hu