Assembling The Squeegee; Upholstery Nozzle - Silvercrest SDR 1100 B2 Bedienungsanleitung

Extension nozzle
Push the extension nozzle
The marking line on the extension nozzle
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the extension nozzle
aligned with both marking lines on the appliance. The extension nozzle
remains locked in this position (see fold-out page Figure B).
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension nozzle
■ The extension nozzle

Assembling the squeegee

Remove the upholstery nozzle
brackets onto the squeegee attachment
Then press the upholstery nozzle
attachment

Upholstery nozzle

Push the upholstery nozzle
The marking line on the upholstery nozzle
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the upholstery nozzle
aligned with both marking lines on the appliance. The upholstery nozzle
remains locked in this position (see fold-out page Figure B).
■ A fabric cover
be used for the cleaning of sensitive surfaces, such as sofas and armchairs.
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
upholstery nozzle
■ The upholstery nozzle
■ 12 │
GB
on to the steam nozzle
10
.
10
is removed in the reverse order.
10
14
14
(see fold-out page).
13
on to the steam nozzle
14
is supplied for use with the upholstery nozzle
15
.
14
is removed in the reverse order.
14
6
and the marking line on the
10
and place this together with the two
.
13
under the mount of the squeegee
6
and the marking line on the
14
as far as the stop .
10 are
10
as far as the stop.
are
14
14
. This can
14
SDR 1100 B2