Whale SH2202 Installations- Und Gebrauchsanweisung Seite 11

Cold Air Inlet
Hot Air Outlet
Vehicle Floor
For Internal Installation, Please Proceed to Step 6
Step 4 Underfloor Installation - Underfloor Heater Location
For underfloor installation, the floor of the vehicle must be manufactured as per Fig. 14. Wooden batons must be
incorporated in the floors construction to secure the screws into.
Locate the Space Heater in the correct position so that the screws will enter the batons, and attach with 10 screws
(No. 8 x 5 ⁄ ") provided. Ensure that the mains cable is fed through the rectangular cut out and is not trapped between
8
the outer cover box and the floor.
Batons built
into floor
Vehicle Wall
Cut out in Floor
Screw Hole
Screw Hole
Fig. 13 Securing the Space Heater
Fig. 14 Securing the Space Heater (Plan View)
Fig. 15 Attaching the Underfloor Space Heater
Vehicle Floor
11
Cut out in floor
R51mm x 2
Space Heater
Gas In
Gas In