Housing Mounting - Bosch UHI Serie Benutzerhandbuch

UHI/UHO Series
5.4

Housing mounting

1.
2.
1
2
Bosch Security Systems, Inc.
Use two 1/4-20 x 0.50 in screws and 1/4 in spring washers
to mount the housing to a mount or a pan/tilt. The spring
washers must be used for the screws to thread properly.
The outermost set of 1/4-20 threaded holes are for
mounting to feed-through mounts, and the innermost 1/4-
20 holes are for mounting to all other mounts and pan/
tilts. See Figure 5.1.
Figure 5.1 Thread holes for mounting with rear connections, or for
feed through wiring
For mounting with rear connections
For mounting with feed-through wiring
Installation Manual
Installation | en
F.01U.167.418 | 3.0 | 2010.04
59