Abicor Binzel PP Plus 240D Betriebsanleitung Seite 18

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Designated Use
2 Technical Data
2.1 Abbreviations
2.2 Nameplate
3 Safety Instructions
3.1 Classification
3.2 Emergency information
4 Putting into operation
4.1 Equipping the torch neck
PP Plus 36D
4.2 Equipping the torch neck
PP Plus 401D
4.3 Mounting the wire guide
4.3.1 Liner
4.3.2 PA liner
4.4 Mounting the neck liner in the
torch neck
4.5 Connecting the cable assembly
4.6 Connecting the PP Plus control
lead
4.7 Setting the shielding gas
4.8 Feeding in the wire
EN - 2
EN-3 5
5.1
EN-3
EN-4 6
EN-4
7
EN-4
8
EN-5
EN-5 8.1
8.2
EN-5 8.3
EN-6 9
EN-6
EN-6
EN-7
EN-8
EN-9
EN-9
EN-10
EN-11
EN-12
PP Plus 36D/401D
Handle operating elements EN-13
2-cycle function of the trigger
Putting into operation
Putting out of operation
Maintenance and cleaning EN-14
Replacing the wire feed roll
Cleaning the wire guide
Torch neck
Troubleshooting
EN-13
EN-13
EN-13
EN-14
EN-15
EN-15
EN-16