Heating milk
1) Fit the whisk for uniform heating
You can clip the other whisk
2) Take the carafe from the plinth
much milk as is needed so that at least the minimum mark inside the carafe
is reached. However, never fill it with milk beyond the upper MAX-marking
(
3) Place the carafe on the plinth
4) Put the lid
5) Press the "Hot" button
The whisk for uniform heating
6) The appliance switches itself off and the integrated control lamp goes out as
soon as the milk reaches a temperature of 60 - 65°C.
NOTICE
►
If you want to stop the preparation process before completion, press the "Hot"
button
process will resume.
7) Take the lid off
Wait about 2 minutes before you heat up another portion of milk.
SMA 500 A1
). If you do, the appliance may overflow.
on.
. The integrated control lamp lights up red.
. If you press the "Hot" button
and pour the hot milk into the desired container.
onto the drive shaft inside the carafe.
onto the whisk holder
and pour the milk in. Thereby, fill it with as
.
starts to turn. This heats the milk evenly.
again, the preparation
.
7
GB