Silvercrest SBLP 4.2 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 50

SilverCrest SBLP 4.2 A1
 Adjust the volume on your audio source or using the - button (4) and
+button (5). Hold down the buttons to do this.
 You can switch off the speakers by holding down the on/off button (1) for
approximately two seconds. You will hear an acoustic signal that
gradually decreases in volume.
While operating in stereo mode, the buttons on the speakers perform the
following functions:
Function
Playback/pause
Next track
Previous track
Go to start of track
Volume up*
Volume down*
Disconnect Bluetooth
* An acoustic signal is played when the minimum or maximum volume is
reached.
48 - English
Action
Briefly press the on/off button (1)
Briefly press the + button (5)
Press the - button (4) twice with a
short pause
Briefly press the - button (4)
Hold down the + button (5)
Hold down the - button (4)
® 1
Briefly press the Bluetooth
®
button (3)