Oil Pump Cable Adjustment - Yamaha Waverunner XLT1200 Wartungshandbuch

FUEL
OIL PUMP

Oil pump cable adjustment

1. Check:
Oil pump lever position
Incorrect → Adjust.
Checking steps:
Fully close the carburetor throttle
valves.
Check that the mark a on the oil pump
lever is aligned with the mark b on the
oil pump body.
2. Adjust:
Oil pump cable
Adjustment steps:
Loosen the locknut 1 and the adjust-
ing nut 2.
Fully close the carburetor throttle
valves.
Adjust the oil pump cable so that the
mark a on the oil pump lever is
aligned with the mark b on the oil
pump body.
Tighten the adjusting nut and locknut.
NOTE:
If the installation position has been marked
for reference on the inner cable at the car-
buretor end while marks a and b are
aligned, adjusting the cable at the carbure-
tor end is easier.
4-33
E