Service Points; Diaphragm Inspection; Accelerator Pump Body Inspection; Arm Inspection - Yamaha Waverunner XLT1200 Wartungshandbuch

FUEL
CARBURETOR

SERVICE POINTS

NOTE:
Before disassembling the carburetor, make
sure to note the number of times the pilot
screw is turned in from its set position to
the seated position.
CAUTION:
Do not use steel wire for cleaning the jets.
This may enlarge the jet diameters and
seriously affect performance.

Diaphragm inspection

1. Inspect:
Diaphragm
Damage → Replace.

Accelerator pump body inspection

1. Inspect:
One way valve
Crack/damage → Replace the acceler-
ator pump body.
Fuel passage
Clog → Clean or replace.

Arm inspection

1. Inspect:
Arm 1
Bends/damage → Repair or replace.
2. Measure:
Arm height a
Arm height:
0–0.2 mm (0–0.008 in)
NOTE:
Measure the distance between the surface
of the carburetor body b and the top sur-
face of the arm.
The arm should be resting on the needle
valve, but not compressing it.
4-23
E