Choke Valve Synchronization Inspection And Adjustment - Yamaha Waverunner XLT1200 Wartungshandbuch

FUEL
CARBURETOR UNIT
Choke valve synchronization inspection
and adjustment
1. Check:
Choke valve synchronization
Not synchronized → Adjust.
Checking steps:
Turn the choke lever 1 and check the
each choke valve is fully closed.
2. Adjust:
Choke valve synchronization
Adjustment steps:
Loosen the screws 1, 2.
Fully close all choke valves, and then
tighten screws 1 and 2.
Screw:
2 N • m (0.2 kgf • m, 1.4 ft • lb)
4-18
E