Storage; Troubleshooting - Silvercrest SGR 150 B2 Bedienungsanleitung

NOTE
only and ensure that none of the parts can get stuck . Otherwise, they could
become deformed!
♦
Ensure that all parts are completely dry before reusing or storing them .

Storage

♦
Clean all parts as described in the section Cleaning .
♦
Carefully stack the drums 2 3 4 5 0 in the storage container 6 and
close the lid 1 .
♦
Push the power cable into the cable storage compartment 7 so that only
the mains plug protrudes .
♦
Store the appliance in a dust-free and dry location .

Troubleshooting

PROBLEM
The appliance is
not working .
The drum 2 3
4 5 0 is
labouring or not
turning at all .
If the malfunction cannot be corrected using one of the suggestions above or if
you have found some other kind of malfunction, please contact our Customer
Service department .
■ 66 │ GB │ MT
The drums 2 3 4 5 0, the drum housing 9, the storage
container 6 and the lid of the storage container 1 as well as the
pusher w are dishwasher-safe . Place the parts in the upper basket
POSSIBLE CAUSE
The appliance is not
connected to a mains socket .
The appliance is defective .
The mains socket is
defective .
The drum 2 3 4 5 0 is
blocked by an obstacle .
POSSIBLE SOLUTION
Connect the appliance to a
mains socket .
Contact the Customer Service
department .
Try a different socket .
Unplug the appliance and
check whether there is any
blockage in the feed tube q .
SGR 150 B2