HQ Power VDPL2201MHW10 Bedienungsanleitung Seite 5

CHANNEL 7
CHANNEL 8
CHANNEL 9
CHANNEL 10
c. DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPL2201MHW10. Multiple VDPL2201MHW10s can be linked through serial linking. The
linking cable should be a two-core screened cable with XLR input and output connectors.
Pin assignment: pin 1: shield – pin 2: data+ – pin 3: data-
d. DMX-512 Chain with Termination
e. Projector DMX Start Address Selection
All DMX-controlled devices need a digital start address so that the correct device responds to the signals. This start
address is the channel number from which the device starts to "listen" to the DMX controller. Enter the correct
number and read it from the display located on the base of the VDPL2201MHW10.
You can use the same starting address for a whole group of devices or enter an individual one for every device.
When all devices have the same address, all the VDPL2201MHW10s will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you
set different addresses, each device will "listen" to a separate channel number. Changing the settings of one channel
will only affect the device in question.
In the case of the 10-channel VDPL2201MHW10, you will have to set the start address of the first
VDPL2201MHW10 to 1, the second VDPL2201MHW10 to 11 (1 + 10), the third to 21 (11 + 10) and so on.
VDPL2201MHW10
LED macro
LED speed
Shutter
Dimmer
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
0 7 No function
8 22 Magenta
23 37 Purple
38 52 Orange
53 67 Pink
68 82 Yellow
83 97 Green
98 112 Turquoise
113 127 Light green
128 142 Sky blue
143 157 Navy blue
158 172 Chartreuse
173 187 Cyan
188 202 White
203 215 Auto chase 1
216 228 Auto chase 2
229 241 Auto chase 3
242 255 Auto chase 4
0 255 Colour changing with speed adjustment
0 7 Open
8 231 Strobe effect 0 – 100%
234 255 Open
0 255 100 – 0%
5 HQ POWER