Coupling The Hands-Free Appliance With Several Mobile Telephones; Separating The Connection; Re-Establishing The Connection - Silvercrest SBTF 10 C2 Bedienungsanleitung

Coupling the hands-free appliance
GB
IE
with several mobile telephones
You can couple the hands-free appliance with up to
eight mobile telephones. If a further mobile telephone is
coupled with the hands-free appliance, the coupling in-
formation of the first coupled mobile telephone is erased.
However, it can only be connected with one mobile
telephone. When the hands-free appliance is switched
on, within a few seconds it attempts to make a connection
to the last used mobile phone. You will hear a double
beep once the devices have been successfully paired.
Should a connection not be possible, the hands-free appli-
ance nonetheless remains recognisable for other mobile
telephones. To use the hands-free appliance with a linked
mobile phone that is not the last used mobile phone, the
connection must be made manual via the Bluetooth
menu of the mobile phone.

Separating the connection

If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth
Switch the hands-free appliance off
or
separate the connection over the Bluetooth
in the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth

Re-establishing the connection

If you want to reconnect the hands-free appliance with the
last used mobile phone:
Check to see that Bluetooth
telephone, then switch the hands-free appliance on.
10
appliance:
®
menu to separate the connection.
®
is activated in the mobile
®
SBTF 10 C2
®
menu
®