Specifications - Monacor LEDS-5PRO/RGB Bedienungsanleitung

4.2 Adjusting the light pattern
1) Select the desired light pattern with the numeri-
cal keys 1 to 9 (11).
2) For light patterns without automatic colour
change select the lighting colour with the colour
buttons (9). The lighting colour corresponds to
the colour of the button.
3) For some light patterns, the brightness of the
LEDs can be adjusted with the buttons
(13).
4) Adjust the speed of the colour change or run-
ning light with the buttons "Slow" and "Rapide"
(12).
5) For the running lights Nos. 4 and 7 the running
direction can be changed with the buttons "Left"
and "Right" (14).
6) Use the button "Reset" (10) to switch to constant
red lighting at maximum brightness.
The following table presents an overview of all
functions:
Numerical
Light pattern
key
1 running light with 6 LEDs
2 constant lighting
two-coloured running light (2 × 3 LEDs)
3
colours change automatically
4 running light with 3 LEDs
three-coloured
5
colours change automatically
single-coloured
6
colour changes automatically
running light with 3 LEDs, running direction
7
and colour change automatically
single-coloured
8
becoming brighter and darker
two-coloured
9
colours change automatically
8 Buttons ON and OFF to switch the LEDs on
and off
9 Buttons to select the lighting colour.
The lighting colour corresponds to the colour of
the button.
10 Button "Reset": switches to constant red lighting
at maximum brightness
11 Buttons 1 – 9 to select a light pattern
12 Buttons "Slow" and "Rapide" for the speed
13 Buttons and for the brightness of the LEDs
14 Buttons "Left" and "Right" to change the running
direction.
LEDS-5PRO/RGB
4.3 Switching the LEDs off and on
Use the button OFF (8) to switch off the LEDs and
the button ON to switch them on again. However,
the controller remains switched on.
and
Selecting the lighting colour
with the buttons (9)
X
X
X
X
8
9
10
®
M O N A C O R I N T E R N AT I O N A L G m b H & C o . K G • Z u m F a l s c h 3 6 • 2 8 3 0 7 B r e m e n • G e r m a n y
C o p y r i g h t © b y M O N A C O R I N T E R N AT I O N A L . A l l r i g h t s r e s e r v e d .
Order No. 38.5430

5 Specifications

Number of LEDs: . . . . . 270 RGB LEDs
Beam angle: . . . . . . . . . 120°
Power supply: . . . . . . . . 12 V , 1.8 A
required plug: . . . . . . . hollow plug 5.5 / 2.1 mm
Ambient temperature: . . 0 – 40 °C
Dimensions
LED strip: . . . . . . . . . . 12 × 3 × 5000 mm
controller: . . . . . . . . . . 77 × 24 × 64.5 mm
remote control: . . . . . . 52 × 7 × 86 mm
Subject to technical modifications.
Adjusting the brightness Adjusting the speed
with the buttons (13) with the buttons (12)
X
X
X
X
X
11
12
13
14
(∅ outside / inside),
positive pole at the
inside contact
Changing the running direc-
tion with the buttons (14)
X
X
X X
X
X
X X
X
X
A - 1 2 1 5 . 9 9 . 0 1 . 0 3 . 2 0 1 1