System Menu - IBIZA LIGHT PARLED318-FX1 Bedienungsanleitung

LED DISPLAY

SYSTEM MENU

Press any key to enter the initial interface.
ADDR - DMX ADDRESS SETTING.
1. Press the either the MENU, UP, or DOWN
buttons until "Addr" is displayed, press
ENTER.
2. The current address will now be displayed
and flashing. Press the UP or DOWN buttons
to find your desired address. Press ENTER to
set your desired DMX address.
CHND - DMX CHANNEL MODE.
1. Press the MENU button until "Chnd" is dis-
played, press ENTER. Either "12CH", "19CH"
will be displayed
2. Press the UP or DOWN buttons to find your
desired DMX channel mode and press ENTER
to confirm and exit.
SLAU - SLAVE MODE
1. Press the MENU button until "SLAu" is dis-
played, press ENTER. It can set the device as
slave
SOUN - SOUND CONTROL MODE.
1. Press the MENU button until "SoUn" is displayed, press ENTER.
2. There will show "So X", Or "Se X", Press ENTER, in "So X" means built-in program in sound control mode.
"X" representing a number between 0-3, Press the UP or DOWN buttons to find your desired show. In Se X
means the sound sensitive, "X" representing a number between 0-99
AUTO - THIS FUNCTION IS AUTO RUNNING EFFECT.
1. Press the MENU button until "Auto" is displayed, press ENTER.
2. The Display will show either "Au 0" - "Au 3". Press the UP or DOWN buttons to find your desired show, And
then press Enter will show "SP X", "SP 0" - "SP 9" is the effect speed
LED - WITH THIS FUNCTION THE DISPLAY BACK LIGHT WILL TURN OFF AFTER 2 MINUTES.
1. Press the MENU button until "Led" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to keep the LED
display on at all times, or "OFF" to switch to have the LED display switch off after 2 minutes.
3. Press ENTER. and then press and hold the MENU button for at least three seconds to confirm.
DISP - THIS FUNCTION WILL REVERSE THE DISPLAY 180º.
1. Press the MENU button until "dISP" is displayed, press ENTER.
2. Press the UP button to select "dSIP" to reverse the display, or "dISP" to change the display back.
3. Press ENTER to confirm.
Ver - Displays the device version
DMX CHANNEL CHART PLEASE REFER TO THE END OF THE MANUAL
4
MANUAL - PARLED318-FX1 / PARLED318-FX2
The LED display has 4 buttons: MENU / UP / DOWN / ENTER
©Copyright LOTRONIC 2018