Step 3: Inserting Batteries In The Remote Control; Step 4: Connecting The Usb Receiver; Step 5: Power On - Medion 98320 Bedienungsanleitung

Note
Change the batteries if it is no longer possible to make entries smoothly.
The operation of the mouse is described on page 31.

Step 3: Inserting batteries in the remote control

The remote control requires 2 batteries type Micro LR03/AAA, 1.5V.
1. Remove the cover from the battery compartment on the underside of the re-
mote control.
2. Insert 2 batteries type Micro LR03/AAA, 1.5V. The illustration on the cover
shows how to insert the batteries properly.
3. Recover the battery compartment.
Note
Change the batteries if it is no longer possible to make entries smoothly.
The operation of the remote control is described on page 48.

Step 4: Connecting the USB receiver

1. Attach the receiving station for the mouse, keyboard and remote control to a
free USB port on your All-In-One PC.

Step 5: Power on

1. Connect the mains adapter supplied to the All-In-One PC.
Then connect the mains cable to the adapter and subsequently to a socket.
2. Press the On/Off switch on the front once, to switch on your All-In-One PC.
3. The operating display will light up.
The On-/ Off switch function can be programmed in the Windows®
Power Options, Hardware and Sound
PC will always be switched off, if the main switch is pressed for more than 4 seconds.
Warning!
If the operating system is not shut down properly (through
18
(please refer to on-line help). The All-In-One
), then there is a risk of data loss.
English
Control Panel,
