Korg SP-200 Bedienungsanleitung Seite 19

Selecting the time signature.
sure.
Button
PIANO 1
PIANO 2
E.PIANO 1
E.PIANO 2
While the metronome is working, keep the METRONOME button pressed and
1
press the button that corresponds to the time signature you wish to use (see table
above). The first movement of the measure will be accented.
To deactivate the accent, keep the METRONOME button pressed and press the
2
sound selection button whose LED is lit.
Note: When the instrument is turned on, the accent is automatically disabled.
Selecting a bell for the accent.
sound.
While the metronome is playing, hold down the METRONOME button, then press
1
the VIBES/GUITAR sound selection button. The LED on the button will light, and a
bell sound will be heard on the first beat of the bar.
2 To return to the normal accent, hold down the METRONOME button and press the
HARPSI/CLAV sound selection button to switch on the LED on the HARPSI/
CLAV button.
Note: When the instrument is turned on, the bell is automatically disabled.
Basic functions
You can add an accent to the first beat of a mea-
Time signature
2 movements (2/4, 2/8...)
3 movements (3/4, 3/8...)
4 movements (4/4, 4/8...)
6 movements (6/4, 6/8...)
The accented beat can be changed to a bell
17