Bosch PLR 50 C Originalbetriebsanleitung Seite 38

OBJ_BUCH-2326-003.book Page 38 Thursday, August 20, 2015 8:43 AM
38 | English
For information on the necessary system requirements for a Bluetooth® connection,
please refer to the Bosch website at
www.bosch-pt.de.
For data transmission via Bluetooth®, time delays between mobile terminal/device
and measuring tool may occur. This can be possible due to the distance between both
devices or the object being measured.
Activating the ® Interface for Data Transmission to a Mobile Terminal/
Device
To activate the Bluetooth® interface, press the Bluetooth® j button on the measuring
tool. Alternatively, the Bluetooth® interface can be activated via the "Basic Settings"
menu (see page 34).
Ensure that the Bluetooth® interface is activated on your mobile terminal/device.
The special Bosch app "PLR measure&go" is available to extend the range of functions
of the mobile terminal/device and to make data easier to process. It can be download-
ed in the respective stores, depending on the device:
The connection between mobile terminal/device and measuring tool is established af-
ter the Bosch application has started. If multiple active measuring tools are found, se-
lect the appropriate measuring tool.
The connection status and the active connection are displayed in the status bar of the
measuring tool (a).
If no connection can be established within 3 minutes of pressing the Bluetooth® j but-
ton, Bluetooth® will automatically switch off to save the batteries/rechargeable bat-
teries.
1 609 92A 1F3 | (20.8.15) Bosch Power Tools