36 8.3.2 Radial Run-Out, Lateral Run-Out And Tire Geometry; 37 8.4 Settings And Service Menu - Bosch WBE 4510 Originalbetriebsanleitung

8.3.2 Radial run-out, lateral run-out and tire
geometry
Navigation menu
Symbol Explanation
Call-up of tire geometry menu.
Selection of functions in menu bar.
Erasing of data displayed.
Exit from menu, return to Balancing menu.
Only active with active menu bar.
Menu bar
Symbol Explanation
Measurement of full wheel.
Measurement of rim, refer to Section 11.1.2.
Display of tire measured value, refer to Section
11.1.3.
Call-up of "Radial run-out minimization" program
(refer to Section 11.4).
Printing of curve displayed.
Only active if printer has been activated
(refer to Section 8.4.2).
Saving, erasing and printing of measured values before
and after minimization for each axle (refer to
Section 11.3).
Only active if printer has been activated
(refer to Section 8.4.2).
Robert Bosch GmbH
Program structure | WBE 4510 | 47
8.4 Settings and service menu
Navigation menu
Symbol Explanation
Calibration menu.
Customer service menu,
for Service only.
User-defined settings menu.
Exit from menu, return to Balancing menu.
8.4.1 Calibration
€
Enter password: <r> <r> <o>
Navigation menu
Symbol Explanation
Selection of functions in menu bar.
Exit from menu, return to Balancing menu.
en
|
1 695 655 163 2010-07-17